| From | Message |
don
Guest
3/02/2005
19:36:06
|
 Subject: 2000 blazer 4.3 engine removal
IP: Logged
Message:
hello:
how do you get to the upper bellhousing bolts
there are also bolts on the back of each head for
grounds and fuel line bracket,there truly is no
room no wonder they install the drivetrain before the body
|
Dan
Guest
3/02/2005
20:45:03
| RE: 2000 blazer 4.3 engine removal
IP: Logged
Message:
You’ll have to buy the proper tools to get up their, things like professional style universal jointed sockets, wobble extensions and a whole lot of foresight to figure it out.
I know this is not a lot of help, but some jobs are just that hard to do and I can’t tell you what experience would teach you.
Dan.
|
les
Guest
4/17/2005
22:20:03
| RE: 2000 blazer air bag removal.
IP: Logged
Message:
Can anyone tell how to remove the steering wheel air bag safely, I have to get at the signal lever.
|
kendric wait
Guest
6/24/2005
11:28:49
| RE: 2000 blazer 4.3 engine removal
IP: Logged
Message:
I am trying to pull the block. The bell housing is a full piece, no dust cover. How do I unbolt the torque converter so that I can pull the motor? This has puzzled me quite a bit and many hours. It doesn't seem like I should have to pull the tranny back just to get the motor out...
Thanks
|
kendric wait
Guest
6/24/2005
11:28:59
| RE: 2000 blazer 4.3 engine removal
IP: Logged
Message:
I am trying to pull the block. The bell housing is a full piece, no dust cover. How do I unbolt the torque converter so that I can pull the motor? This has puzzled me quite a bit and many hours. It doesn't seem like I should have to pull the tranny back just to get the motor out...
Thanks
|
